Ftp User Interface - HP StorageWorks M2402 User Manual

FTP User Interface

The following tasks can be managed through an FTP interface:
Accessing the FTP User Interface (UI)
To access the router using an FTP User Interface:
1. Connect the router to the Ethernet network used by the host computer.
2. Start an FTP session using the router IP address:
Note:
utility will store the backup configuration file.
3. Enter the user name and password.
Network Storage Router M2402 User Guide
Accessing the FTP User Interface
Backing Up and Restoring Configuration
Copying Trace Buffers, page 184
Upgrading Firmware, page 185
ftp <IP address>
where IP address is the IP address of the router.
The default router IP address is 1.1.1.1.
You may also need to specify the external directory location where your FTP
The default user name is
(UI), page 181
Settings, page 182
and the default password is
root
6
.
password
181