Docomo arrows tab lte F-01D Instruction Manual page 79

◆ Connecting with registered
Bluetooth devices
Connect Bluetooth device. You can listen to the music
using a Bluetooth device, or exchange data to or from a
Bluetooth device.
･
Set a Bluetooth device to connection stand-by mode in
advance.
1
From the Applications menu, [Settings]→
[Wireless & networks]
2
Mark [Bluetooth]→[Bluetooth settings]→
[Find nearby devices]
･
To search the device again, tap [Scan for devices].
3
Tap a Bluetooth detected→Enter a passkey
(PIN) if necessary, [OK]/[Pair]
■ When connection is requested from another
Bluetooth device
If a Bluetooth pair setting request screen appears, enter a
passkey (PIN) if necessary and tap [OK], or tap [Pair].
✔INFORMATION
･
Tapping at the right of a Bluetooth device paired
from Bluetooth settings allows you to change device
name, unpair, and select connection type.
･
If the terminal is not detected from the Bluetooth device,
mark [Discoverable] in Bluetooth settings. Unmark to
cancel detectable status.
◆ Sending or receiving data to or from
Bluetooth device
You can send data such as Gallery (→P81) and contacts or
receive the data via Bluetooth communication.
<Example> Sending files in Gallery
1
Open Gallery to select an image (1 sec. or
more)
2
→[Bluetooth]
･
When Bluetooth function is OFF, tap [Turn on] on
the confirmation screen.
3
Tap a Bluetooth device
Open the Notification panel to check if transmission is
completed.
<Example> Receiving files from a Blutooth device
1
Send files from a Bluetooth device
･
If the terminal is not detected from the Bluetooth
device, mark [Discoverable] in Bluetooth settings.
2
After file arrival is notified, open the
Notification panel →[Bluetooth share:
Incoming file]→[Accept]
A received file can be checked from the notification
panel or [Show received files] in Bluetooth settings.
◆ Canceling connection with a
Bluetooth device
1
From the Applications menu, [Settings]→
[Wireless & networks]→[Bluetooth
settings]
2
Tap a Bluetooth device→[OK]
◆ Changing terminal name for
Bluetooth communication
1
From the Applications menu, [Settings]→
[Wireless & networks]→Mark [Bluetooth]→
[Bluetooth settings]
2
[Device name]→Enter the terminal name→
[OK]
77
File management