Docomo arrows tab lte F-01D Instruction Manual page 110

◆ Updating software immediately
Software update starts immediately.
･
There are two ways to activate software update,
activating from Software update notice screen and
activating from the menu.
･
While rewriting or updating the software, all key
operations become disabled and rewriting or updating
cannot be canceled.
<Example> Activating software update from the
menu
1
From the Applications menu, [Settings]→
[About phone]→[Software Update]→[Start
the software update]→[Yes]→
Downloading starts automatically→
Downloading is complete
･
If software update is not needed, [No update is
needed.] is displayed.
Activating from Software update notice screen :
Display Software update notice screen→[Starts
update]
2
Rewriting starts automatically
approximately 3 seconds after [Ready for
update.] is displayed
･
Rewriting starts when you tap [OK].
3
The terminal restarts automatically→
Software update starts
4
Approximately 5 seconds after the update
ends, the terminal restarts automatically
When the software update is complete, the Home
screen is displayed.
❖
Post-update display
(software update completed) appears on the status bar.
Open the notification panel. Update completion screen is
displayed.
･
(software update completed) disappears once you
have checked the notification.
108
Appendix/Index