Docomo arrows tab lte F-01D Instruction Manual page 54

❖
Connecting to network with Wi-Fi ON
1
From the Applications menu, [Settings]→
[Wireless & networks]
2
Mark [Wi-Fi]
Wi-Fi is ON and available Wi-Fi networks are scanned.
3
[Wi-Fi settings]
Detected Wi-Fi network names and the security
settings (open network or protected network) are
displayed in Wi-Fi network list.
4
Select a Wi-Fi network→[Connect]
･
When you select a Wi-Fi network protected by
security, enter a password (security key) and tap
[Connect].
✔INFORMATION
･
Even when Wi-Fi is ON, packet communication is
available. However, while you connect Wi-Fi network, Wi-
Fi comes first. When the Wi-Fi network is disconnected, it
switches to LTE/3G/GPRS network connection
automatically. Note that packet communication fee
applies for using 3G/GPRS network.
❖
Notification of open network
Set to notify you when Wi-Fi open network is detected.
･
Set Wi-Fi to ON in advance.
1
From the Applications menu, [Settings]→
[Wireless & networks]→[Wi-Fi settings]
2
Mark [Network notification]
❖
Scanning Wi-Fi network
･
Set Wi-Fi to ON in advance.
1
From the Applications menu, [Settings]→
[Wireless & networks]→[Wi-Fi settings]
2
→[Scan]
Scanning for Wi-Fi networks starts. Detected Wi-Fi
networks displayed in the Wi-Fi network list.
❖
Simple registration of Wi-Fi network
You can connect through simple operations if connecting
via a Wireless access point supporting AOSS or WPS.
･
Set Wi-Fi to ON in advance.
1
From the Applications menu, [Settings]→
[Wireless & networks]→[Wi-Fi settings]→
[Easy Wi-Fi registration]
2
Select a registration method
AOSS system :
AOSS button on the Access point→[OK]
WPS system : [WPS system]→[Push button system]/
[PIN entry system]→[Yes]→On the access point,
perform operations
･
In case of push button method, press a dedicated
button on an access point. In case of PIN entry
method, enter PIN code displayed on the terminal to
an access point and tap [OK].
✔INFORMATION
･
AOSS connection may not be available depending on
the LAN access point. If connection is failed, connect by
WPS system or manually.
52
[AOSS system]→[Yes]→Press
Settings