Docomo arrows tab lte F-01D Instruction Manual page 53

❖
Initializing an access point
By initializing an access point, the default state is restored.
1
From the Applications menu, [Settings]→
[Wireless & networks]→[Mobile networks]
→[Access Point Names]
2
→[Reset to default]
❖
sp-mode
sp-mode is ISP for NTT DOCOMO smartphone. In addition
to accessing Internet, you can use the mail service using
the same address as i-mode mail (@docomo.ne.jp), etc.
･
sp-mode is a service requiring subscription. For details
on sp-mode, refer to NTT DOCOMO website.
❖
Setting mopera U
mopera U is ISP of NTT DOCOMO. If you have subscribed
to mopera U, you can use Internet after making the simple
settings.
･
mopera U is a service requiring subscription.
1
From the Applications menu, [Settings]→
[Wireless & networks]→[Mobile networks]
→[Access Point Names]
2
Mark [mopera U]/[mopera U設定 (mopera U
settings)]
✔INFORMATION
･
[mopera U設定 (mopera U settings)] is an access point for
setting mopera U. When you use the access point for
setting mopera U, packet communication charges for
setting do not apply. Note that you can set only the initial
setting screen or the change setting screen. For details on
mopera U settings, refer to mopera U website.
･
To use [mopera U], subscription to flat-rate data plan is
required. For details on mopera U, refer to NTT DOCOMO
website.
◆ Setting Airplane mode
When Airplane mode is set, wireless functions of the
terminal (packet communication, Wi-Fi, tethering,
Bluetooth functions) are disabled.
1
From the Applications menu, [Settings]→
[Wireless & networks]
2
Mark [Airplane mode]
◆ Wi-Fi
With Wi-Fi function of the terminal, you can use mail or
access Internet by connecting to home or company
network or wireless LAN access point of public wireless
LAN service.
To connect to a LAN access point, you need to set
connection information.
■ Reception interference caused by Bluetooth
Wireless LAN (IEEE 802.11b/g/n) and Bluetooth function
use the same frequency band (2.4 GHz). If you use the
wireless LAN function and Bluetooth function of the
terminal at the same time, reception interference may
occur or the communications speed may lower. Also, you
may hear noise or have a connection problem.
Even when you use only wireless LAN function of the
terminal, the same problem may occur when someone
uses a Bluetooth device near you. In these cases, do the
following.
･
Keep the terminal over 10 meters away from a Bluetooth
device.
･
Within 10 meters, turn off the Bluetooth device.
■ Available channels
1 - 13 channel frequency bands can be used in Japan, and
1 - 11 channel frequency bands overseas.
51
Settings