Docomo arrows tab lte F-01D Instruction Manual page 48

◆ Managing authentication
information
You can install authentication information for accessing
security-protected Wi-Fi networks or VPNs or other
certificates from the microSD card. You can also set a
password to authentication information storage for saving
authentication information and certificates.
❖
Setting password for authentication
information storage
1
From the Applications menu, [Settings]→
[Location & security]→[Set password]
2
Enter a password→Enter the password
again→[OK]
❖
Enabling authentication information
and certificates
You can enable authentication information and certificates
by allowing applications on the terminal to access
authentication information storage set with a password.
･
Set a password to certification information storage in
advance.
1
From the Applications menu, [Settings]→
[Location & security]
2
Mark [Use secure credentials]
3
Enter the password for the authentication
information storage→[OK]
❖
Clearing authentication information
storage
You can clear all authentication information or certificates
from the authentication information storage to reset the
storage password.
1
From the Applications menu, [Settings]→
[Location & security]→[Clear credentials]→
[OK]
❖
Installing authentication information
or certificates from the microSD card
1
From the Applications menu, [Settings]→
[Location & security]→[Install from SD card]
2
Select the authentication information/
certificate you want to install
3
If necessary, enter the password→[OK]
4
Enter the name of the authentication
information/certificate→[OK]
･
If a password is not set to the authentication
information storage, follow the onscreen
instructions to set the password.
◆ Encrypting data on the terminal
Encrypting data prevents the others from viewing the data
on the terminal via a PC, when the terminal is misplace or
stolen.
･
If encrypted, the data will be decrypted after turning the
power on and entering the PIN code.
･
Before encrypting, make sure to check the onscreen
explanation.
1
From the Applications menu, [Settings]→
[Location & security]→[Encrypt phone]
2
[Encrypt phone]
46
Before using the terminal