Docomo arrows tab lte F-01D Instruction Manual page 109

◆ Updating software automatically
New software can be downloaded automatically and
rewritten at a preset time.
❖
Auto-update setting
･
The settings of Software Update is set to [Automatic
Update] by default.
1
From the Applications menu, [Settings]→
[About phone]→[Software Update]→
[Configure the software update]
2
[Automatic Update]/[Manual Update]
❖
When software update is necessary
If the software is downloaded automatically,
update available) appears on the status bar to notify and
you can check and change rewriting time.
･
When the rewrite start time is reached with
update available) displayed, software is automatically
rewritten and (software update available)
disappears.
1
Open the Notification panel and tap the
notification
Software update notice screen appears.
Rewrite notice screen
2
Perform target operations
Closing confirmation :
Return to the Home screen. Rewriting starts when the
preset time is reached.
Changing preset time :
For reserved update →P109 "Reserving software
update"
Rewriting immediately :
For updating immediately →P108 "Updating software
immediately"
✔INFORMATION
･
If the software update could not be activated at the auto-
update time,
the status bar.
･
If there is insufficient battery power for software update,
(software
software update does not start even when the preset time
is reached. The software update will be performed at the
same time the following day.
(software ･
Software cannot be updated automatically when the
Auto-update setting is set to [Manual Update] or while
updating software by Now update.
107
[OK]
[Sets Time]
[Starts update]
(software update available) appears on
Appendix/Index