Docomo arrows tab lte F-01D Instruction Manual page 46

❖
Disabling the PIN lock
1
When the PIN code is locked, [Unlock PIN
lock]
2
Enter [**05* [PUK] * [new PIN code] * [new
PIN code] #]
･
For example, to change the PIN code to 7777 when
the PUK is 88888888, enter
"**05*88888888*7777*7777#".
◆ Screen lock
If the screen lock is set, authentication is required when
resuming from the sleep mode or turning the power on,
which prevents others from misusing the terminal.
･
For the screen lock you can select unlock method from 3
types: pattern, security code and password.
❖
Setting screen lock
Set unlock method to activate screen lock.
･
When you change pattern, security code or password,
set again.
1
From the Applications menu, [Settings]→
[Location & security]→[Configure lock
screen]
･
When the screen lock is activated, unlocking is
required after tapping [Configure lock screen].
2
[Off]/[None]/[Pattern]/[Security code]/
[Password]
Disable screen lock :
Do not protect with security :
･
Unlock screen appears but the terminal is not
protected with security.
Entering pattern to unlock :
jointing at least four points vertically, horizontally
and diagonally to enter a pattern→[Continue]→
Enter the same pattern→[Confirm]
[Off]
[None]
[Pattern]→Slide like
･
When you set for the first time, example pattern
appears.
Entering security code to unlock :
Enter the 4- to 16-digit security code→[OK]→
Reenter the security code→[OK]
Entering password to unlock :
4- to 16-digit password including alphabets→
[Continue]→Reenter the password→[OK]
✔INFORMATION
･
To set time for locking the screen after going into the
sleep mode, from the Applications menu, tap [Settings]→
[Location & security]→[Timeout]→Tap a time you want
to set.
･
If you do not want to display the pattern when unlocking
the screen, from the Applications menu, tap [Settings]→
[Location & security]→[Use visible pattern] to unmark.
･
To enable vibration when entering the pattern, from the
Applications menu, tap [Settings]→[Location & security]
→[Use tactile feedback] to mark.
❖
Manual screen lock
1 X
The terminal goes into sleep mode and the screen lock
is activated.
44
[Security code]→
[Password]→Enter the
Before using the terminal