Docomo arrows tab lte F-01D Instruction Manual page 55

❖
Adding Wi-Fi network
Enter network SSID or security to add Wi-Fi network
manually.
･
Set Wi-Fi to ON in advance.
1
From the Applications menu, [Settings]→
[Wireless & networks]→[Wi-Fi settings]
2
[Add Wi-Fi network]
3
Enter a network SSID of Wi-Fi network to
add→Select security
･
Security can be set to [None], [WEP], [WPA/WPA2
PSK] or [802.1x EAP].
4
Enter additional security information as
required→[Save]
❖
Using static IP address for connection
You can set to connect to a Wi-Fi network using a static IP
address.
1
From the Applications menu, [Settings]→
[Wireless & networks]→[Wi-Fi settings]
2
Select a Wi-Fi network to connect
3
[IP settings]→[Static]
4
Select [IP address] and the other items→
Enter necessary information
･
Enter [IP address], [Gateway], [Network prefix
length] and [DNS 1] to enable a static IP address.
❖
Disconnecting Wi-Fi network
1
From the Applications menu, [Settings]→
[Wireless & networks]→[Wi-Fi settings]
2
Select a connected Wi-Fi network→[Forget]
✔INFORMATION
･
When you disconnect Wi-Fi network turning Wi-Fi OFF,
connection is automatically made if available Wi-Fi
network exists when Wi-Fi is turned ON next time.
❖
Wi-Fi auto disconnect settings
Set operations of Wi-Fi function when the terminal screen
is OFF or during charge.
1
From the Applications menu, [Settings]→
[Wireless & networks]→[Wi-Fi settings]
2
[Wi-Fi disconnect policy]
3
[When screen turns off (uses more mobile
data)]/[Never when plugged in]/[Never
(uses more battery power)]
❖
Checking MAC address/IP address
1
From the Applications menu, [Settings]→
[Wireless & networks]→[Wi-Fi settings]
2
→[Advanced]
53
Settings