Security/Network/Arp Inspection/Configuration - i3 International S241 User Manual

Parameters:
Items
Delete
Port
VLAN ID
IP address
MAC address
WEB Interface:
A. Click C onfiguration/Security/Network/IP Source Guard/Static Table
B. Click "Add New Entry" to create a new data with Port number, VLAN ID, IP Address & MAC Address
C. Click Save to apply the setting or Reset to restore the previous setting.

Security/Network/ARP Inspection/Configuration

ARP Inspection is a protection for a certain "man-in-the-middle" attacks. It will validate the ARP request & response packet
by interception with MAC-to-IP databae(dynamic:DHCP Snooping table, static: Static table)
LOCATION：Configuration>Security>Netowrk>IP Source Guard>Static Table
Parameters:
Items
Mode
Port Mode Configuration
WEB Interface:
onfiguration/Security/Network/ ARP Inspection/Configuration
A. Click C
B. Select Enabled/Disabled ARP Inspection Mode
C. Select Enabled/Disabled ARP Inspection Mode for each port.
D. Click Save to apply the setting or Reset to restore the previous setting.
Description
Check to delete the entry. It will be deleted during the next save
The logical port for the settings
The vlan id for the setting
Allowed Source IP address
Allowed Source MAC address
Description
Enable the Global ARP Inspection or disable the Global ARP Inspection
Specify ARP Inspection is enabled on which ports. Only when both Global Mode and
Port Mode on a given port are enabled, ARP Inspection is enabled on this given port.
49