i3 International S241 User Manual page 115

Frame Type Indicates the frame type of the ACE. Possible values are:
Any：The ACE will match any frame type.
EType：The ACE will match Ethernet Type frames. Note that an Ethernet Type based ACE will not get
matched by IP and ARP frames.
ARP：The ACE will match ARP/RARP frames.
IPv4：The ACE will match all IPv4 frames.
IPv4/ICMP：The ACE will match IPv4 frames with ICMP protocol.
IPv4/UDP：The ACE will match IPv4 frames with UDP protocol.
IPv4/TCP：The ACE will match IPv4 frames with TCP protocol.
IPv4/Other：The ACE will match IPv4 frames, which are not ICMP/UDP/TCP. IPv6: The ACE will match
all IPv6 standard frames.
Action Indicates the forwarding action of the ACE.
Permit：Frames matching the ACE may be forwarded and learned.
Deny：Frames matching the ACE are dropped.
Rate Limiter Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When Disabled is
displayed, the rate limiter operation is disabled.
Port Redirect Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the
port number. The allowed values are Disabled or a specific port number. When Disabled is
displayed, the port redirect operation is disabled.
Specify the mirror operation of this port. The allowed values are：
Mirror
Enabled：Frames received on the port are mirrored.
Disabled：Frames received on the port are not mirrored.
The default value is "Disabled".
CPU Forward packet that matched the specific ACE to CPU.
CPU Once Forward first packet that matched the specific ACE to CPU.
Counter The counter indicates the number of times the ACE was hit by a frame.
Conflict Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware
due to hardware limitations.
Buttons
Combined
Auto-refresh
WEB Interface:
Monitor/Security/Network/ACL Status
A. Click
B. Select a software module from the scroll-down list.
：Select the QCL Status from this drop down list.
：Check this box to refresh the page automatically. Automatic refresh occurs at
regular intervals.'
：Updates the system log entries, starting from the current entry ID.
114