Chapter 4 Web Configuration; System/Information; System/Ip - i3 International S241 User Manual

Chapter 4
This chapter describes all of the configuration for this PoE Web Smart Switch.

System/Information

Using System Information page to set System Contact, Name, Location, Timezone offset
LOCATION：Configuration>System>Information
Parameters:
Items
System Contact
System Name
System Location
Note the unit of system timezone is minutes
WEB Interface:
To configure System Information
A. Click Configuration/System/Information
B. Specify the System contact, Name, Location and Timezone.
C. Click Save to apply the setting or Reset to restore the previous setting

System/IP

Using IP page to Configure Static IP Address or DHCP client.
LOCATION：Configuration>System>IP
Parameters:
Items
DHCP Client
IP Address
IP Mask
IP Router
VLAN ID
DNS Server
DNS Proxy
Renew
WEB CONFIGURATION
Description
Administrator is responsible for this device ( Maximum Length：255 characters)
Name of this device ( Maximum Length：255 characters)
Sets the location of this device ( Maximum Length：255 characters)
Description
Sets the checkbox in configured column to enable DHCP client or uncheck for static IP Address
Address of the VLAN specified in the VLAN ID field. It should match with your management
PC/NB's setting. (Default IP：192.168.0.10)
This mask identifies the host address bits used for routing to specific subnet.
IP address of the gateway
Default VLAN ID＝1, it needs to match your management PC/NB's VLAN ID.
(Range：1~4096)
A domain name server which client requests the host name to IP address
Enable this switch to maintain a DNS database
Renew a DHCP lease
17