Aggregation/Static - i3 International S241 User Manual

Parameters:
Items
Common Server Configuration
Timeout
Dead Time
RADIUS Authentication Server Configuration
Enable
IP Address
Port
Secret
WEB Interface:
To Configure ACL Rate limitation：
A. Click
B. Specify the parameters of the RADIUS Authentication Server.
C. Click Save to apply the setting or Reset to restore the previous setting.

Aggregation/Static

Using Aggregation Mode Configuration page to create multiple links between devices that works as one virutal aggregated
link. In this page, we can create static trunk groups.
LOCATION：Configuration>Port Trunking>Static
Description
The maximum waiting time to wait for a reply from server (Range：3-3600 seconds)
The time after which the switch Considers an authentication server to be dead if it does not reply.
(Range : 0~3600 seconds)
Enable the RADIUS Authentication Server by Check this box
IP Address of RADIUS server
The UDP port to use on the RADIUS authentication Server.
Encryption key(Maximum characters：29)
Configuration/Security/AAA
51