Igmp Snooping/Vlan Configuration - i3 International S241 User Manual

IGMP Snooping/VLAN Configuration

Each page shows up to 99 entries from the VLAN table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the VLAN table. The first displayed will
be the one with the lowest VLAN ID found in the VLAN table.
LOCATION：Configuration>IPMC>IGMP Snooping>VLAN Configuration
Items
Delete
VLAN ID
IGMP Snooping Enabled
IGMP Querier
Compatiblity
RV
QI
QRI
LLQI(LMQI for IGMP)
URI
WEB Interface:
Configuration/IPMC/IGMP Snooping/VLAN Configuration
A. Click
B. Click "Add New IGMP VLAN" to add new entry
C. Click Save to apply the setting, Reset to restore the previous setting.
D. Refresh Button：It will update the displayed table starting from that or the next closest VLAN Table Match.
Description
Check the delete the entry. The desginated entry will be deleted during the next save.
The VLAN ID of the entry.
Enable the per-VLAN IGMP
Snooping. Up to 32 VLANs can be
selected for IGMP Snooping.
Enable the IGMP Querier in the VLAN.
Compatibility is maintained by hosts and routers taking appropriate actions depending on the
versions of IGMP operating on hosts and routers within a network. The allowed selection is
IGMP-Auto,Forced IGMPv1, Forced IGMPv2, Forced IGMPv3, default compatibility value is
IGMP-Auto.
Robustness Variable. The Robustness Variable allows tuning for the expected packet loss on a
network. The allowed range is 1 to 255, default robustness variable is 2
Query Interval. The Query Interval is the interval between General Queries sent by the Querier.
The allowed range is 1 to 31744 seconds. Default query interval is 125 seconds
Query Response Interval. The maximum Response Delay used to calculate the Maximum
Response Code inserted into the periodic General Queries. The allowed range is 0 to 31744 in
tenths of seconds, default query response interval is 100 in tenths of seconds(10 seconds).
Last Member Query Interval. The last Member Query Time is the time value represented by the
Last Member Query Interval, multiplied by the Last Member Query Count. The allowed range is
0 to 31744 in tenths of seconds, default last member query intervall is 10 in tenths of seconds
(1 second).
Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a
host's initial report of membership in a group. The allowed range is 0 to 31744 seconds,
default unsolicited report interval is 1 second.
63