Security/Access Management Statistics; Security/Network/Port Security/Switch - i3 International S241 User Manual

Security/Access Management Statistics

Using Access Management Statistics page to monitor the management traffic through 5 interfaces, included HTTP, HTTPS,
SNMP, TELNET and SSH.
LOCATION：Monitor>Security>ACL Status
Parameters:
Items
Interface
Received Packets
Allowed Packets
Discarded Packets
WEB Interface:
Monitor/Security/Access Management Statistics
A. Click
B. Check the "Auto-refresh" to refresh the page periodly.

Security/Network/Port Security/Switch

This page shows the Port Security status. Port Security is a module with no direct configuration. Confugration comes
indirectly from the user modules. When a user module has enabled port security on a port, the port is set-up for
software-based learning. In this mode, frames from unknown MAC addresses are passed on the port security module,
which in turn asks all user modules whether to allow this new MAC address to forward or block it. For a MAC address to be
set in the forwarding state, all enabled user modules must unanimously agree on allowing the MAC address to forward. If
only one chooses to block it, it will be blocked until that user module decides otherwise. The status page is divided into two
Description
The interface type through which the remote host can access the switch.
Number of received packets from the interface when access management mode is enabled.
Number of allowed packets from the interface when access management mode is enabled.
Number of discard packets from the interface when access management mode is enabled.
107