Chapter 1 Introduction; Product Overview; Features - i3 International S241 User Manual

Chapter 1
This chapter provides an overview of the S241 switch, and introduces the key features and supported specifications of this
PoE Web Smart switch.

Product Overview

This PoE switch is a PoE Web management switch equiped with 24-ports 10/100/1000BaseT(X) plus 2-port gigabit SFP
open slots. It provides a broad range of features for Layer_2 plus switching and fully 802.3at/af PoE/PoE+ functions. It was
designed for easy installation and high performance in an environment where the traffic is on the network and the number
of users increases continuously. The smart and efficient power design can improve the power saving.

Features

Features
Dual Images
IPv4
IPv6
Log
Power Saving
Security
Authentication
Port Limiting
Port Configuration
Port Mirroring
Port Aggregation
Spanning Tree
Algorithm
IEEE 802.1D
Bridge
Quality of Service
DHCP
Configuration
Firmware
CLI command
INTRODUCTION
Descriptions
Prevent any kind of upgrading process failure
Supports IPv4 addressing, management and QoS
Supports IPv6 addressing, management and MLD snooping
Support local and remote syslog server with 3 levels(Info, Warning, Error)
LED Power management
802.3az EEE
Private VLAN(Static)
ACLs for filtering, policing, and port copy, including ACL wizards
Telnet, Web - username/password
Telnet - SSH
SNMP v1/v2c – Community strings
SNMP version 3 – MD5 or SHA password
Port-based 802.1X
Input rate limiting per port(manual setting or ACL)
Speed, Duplex mode, Flow control, MTU, Power saving mode
1 sessions, up to 10 source port to one analysis port per session
IEEE 802.3ad Link Aggregation, static and LACP
Supports standard STP, Rapid Spanning Tree Protocol (RSTP), (Multiple Spanning Tree Protocol
(MSTP)
Supports dynamic data switching and addresses learning
Traffic classes(1,2, or 4/8 active priorities) Storm control for UC, MC and BC
Client
Save and Restore configuration
Upgrade & firmware image switch using Web & console port
Support Cli command with console port (Baudrate:115200, DataBit:8, Parity: N,StopBit 1)
5