Spanning Tree/Port Status - i3 International S241 User Manual

Point2Point
Uptime
Buttons
WEB Interface:
Monitor/Spanning Tree/Bridge Status
A. Click

Spanning Tree/Port Status

Using STP Port Status page to display the STP CIST port status for physical ports of the currently selected.
LOCATION：Monitor>Spanning Tree>Port Status
Parameters:
Items Description
Port The switch port number of the logical STP port.
CIST Role The current STP port role of the CIST port. The port role can be one of the following values:
AlternatePort BackupPort RootPort DesignatedPort Disabled.
CIST State The current STP port state of the CIST port. The port state can be one of the following values:
Discarding Learning Forwarding
Uptime The time since the bridge port was last initialized.
Buttons
Auto-refresh
WEB Interface:
To display STP Port Status：
Monitor/Spanning Tree/Port Status
A. Click
The current STP port point-to-point flag. A point-to-point port connects to a
non-shared LAN media. The flag may be automatically computed or explicitly
configured. The point-to-point properties of a port affect how fast it can transit
to STP state.
The time since the bridge port was last initialized.
：Check this box to refresh the page automatically. Automatic refresh occurs
Auto-refresh
：Updates the system log entries,starting from the current entry ID.
：Check this box to refresh the page automatically. Automatic refresh occurs at
regular intervals.'
：Updates the system log entries, starting from the current entry ID.
at regular intervals.'
to display the information.
to display the participating STP Ports Status.
127