Ports/Detailed Statistics - i3 International S241 User Manual

Conflict
Buttons
WEB Interface:
Monitor/Ports/QCL Status.
A. Click
B. Select the user type to display from a dropdown list.
C. If any of the entries show the conflict, click "Rresolve Conflict" to resolve the conflict then click "refresh" to check
the result.

Ports/Detailed Statistics

Using the Detailed Port Statistics page to display the detailed statistic on network. All values have been accumulated since
the system bootup.
LOCATION：Monitor>Ports>Detailed Statistics
Parameters:
Items
Receive Total and Transmit Total
RX and TX packets
Rx and Tx Octets
Rx and Tx Unicast
Rx and Tx Multicast
Rx and Tx Broadcast
Rx and Tx Pause
Receive and Transmit Size
Displays Conflict status of QCL entries. As H/W resources are shared by multiple applications. It may
happen that resources required to add a QCE may not be available, in that case it shows conflict
status as 'Yes', otherwise it is always 'No'. Please note that conflict can be resolved by
releaseing the H/W resources required to add QCL entry on pressing 'Resolve Conflict' button.
Combined
：Select the QCL Status from this drop down list.
：Check this box to refresh the page automatically. Automatic refresh occurs at
Auto-refresh
：Click to release the resources required to add QCL entry, incase conflict
：Updates the system log entries starting from the current entry ID.
Description
The number of received and transmitted (good and bad) packets.
The number of received and transmitted (good and bad) bytes. Includes FCS, but excludes
The number of received and transmitted (good and bad) unicast packets.
The number of received and transmitted (good and bad) Multicast packets.
The number of received and transmitted (good and bad) Broadcast packets.
A count of the MAC Control frames received or transmitted on this port that have an
The number of received and transmitted.
regular intervals.
status for any QCL entry is 'yes'
framing bits.
opcode indicating a PAUSE operation.
105