Voice Vlan/Configuration - i3 International S241 User Manual

Parameters:
Items
Delete
VCE ID
IP Address
Mask Length
VLAN ID
Port Members
WEB Interface:
A. Click Configuration/VCL/IP Subnet-based VLAN
B. Click "Add New Entry" to create a new entry
C. Set VCE ID, IP Address, subnet Mask, VLAN ID and port members.
D. Click Save to apply the setting, Reset to restore the previous setting.

Voice VLAN/Configuration

Using the Voice VLAN Configuration page to configure the switch for VoIP service. The Voice VLAN feature enables voice
traffic forwarding on the Voice VLAN, then the switch can classify and schedule network traffic. It is recommended that
there be two VLANs on a port; one for voice, one for data. Before connecting the IP device to the switch, the IP phone
should configure the voice VLAN ID correctly, It should be configured through its own GUI.
LOCATION：Configuration>Voice VLAN>Configuration
Description
To delete a IP subnet-based VLAN entry, check this box and press save. The entry will be deleted in
the stack.
Indicates the index of the entry. It is user configurable. It's value ranges from 0-128. If a VCD ID is
0, application will auto-generate the VCE ID for that entry. Deletion and lookup of IP subnet-based
VLAN are based on VCE ID
Indicates the IP Address
Indicates the network mask length
Indicates the VLAN ID. VLAN ID can be changed for the existing entries
A row of check boxes for each port is displayed for each IP subnet-based VLAN entry. To include a
port in a IP subnet-based VLAN, check the box. To remove or exclude the port from the IP
subnet-based VLAN, make sure the box is unchecked. By default, no ports are members, and all
boxes are unchecked.
83