Security/Switch/Ssh - i3 International S241 User Manual

Parameters:
Items
Client
Authentication Method
Fallback
WEB Interface:
Configuration/Security/Switch/Auth Method
A. Click
B. Select Authentication Method for console, telnet, ssh and web, specify the Fallback check if needed.
C. Click Save to apply the setting or Reset to restore the previous setting

Security/Switch/SSH

Using SSH configuation page to setup Secure shell management interface.
LOCATION：Configuration>Security>Switch>SSH
Parameters:
Items
Mode
WEB Interface:
Configuration/Security/Switch/SSH
A. Click
B. Set Mode Enable or Disabled
C. Click Save to apply the setting or Reset to restore the previous setting
Description
Specify the authentication Method for Administrator
There are 4 options for Console and Web
None：disables access vis specified management interface
Local：checks by password
RADIUS：authenticated via RADIUS Server
TACACS+: authenticated by TACACS+ server
This only works for Authentication Method ="RADIUS" and "TACACS+". When Radius
Server authentication fail, it will check by local password if fallback is checked
Description
You can enable SSH by setting Mode enable. SSH service on this switch supports password
authentication only. It can be authenticated by RADIUS, TACACS+ or locally
.
25