Vlans/Ports - i3 International S241 User Manual

WEB Interface:
A. Click Configuration/VLANs/VLAN Membership
B. Change Default VLAN ID=1, if necessary.
C. Click "Add New Entry" to create a new VLAN group with ID, Name and port members.
D. Click Save to apply the setting, Reset to restore the previous setting.
E. Refresh Button：Refresh the Display table Starting from the first entry of the VLAN table.

VLANs/Ports

Using VLAN Ports Configuration page to set VLAN attributes for specific interfaces, including processing frames with
embedded tags, Ingress filtering, setting the accepted frame types and assigning Port VLAN ID.
LOCATION：Configuration>VLANS>Ports
Parameters:
Items
Ethertype for Custom S-ports
Port
Port Type
Ingress filtering
Frame Type
Description
This field specifies the ether type used for Custom S-ports. This is a global
setting for all the Custom S-ports.
The logical port number of this row
Port can be one of the following types：
Unaware, Customer port(C-port), Service Port(S-port), Custom Service
port(S-custom-port). If Port Type is Unaware, all frames are classified to the Port
VLAN ID and tags are not removed
Enable ingress filtering on a port by checking the box. This parameter affects
VLAN ingress processing. If ingress filtering is enabled and the ingress port is
not a member of the classified VLAN of the frame, the frame is discarded. By
default, ingress filtering is disabled.
Determines whether the port accepts all frames or only tagged/untagged
frames. This parameter affects VLAN ingress processing.If the port only
accepts tagged frames,untagged frames received on this port will be discarded.
77