Ports/Qcl Status - i3 International S241 User Manual

WEB Interface:
A. Click Monitor/Ports/QoS Statistics.
B. Check "Auto-refresh" to update the switch's port state automatically and click "clear" to reset all data.

Ports/QCL Status

Using QoS Control List Status to show QCE configured for different users or software modules and whether or not there is a
conflict.
LOCATION：Monitor>Ports>QCL Status
Parameters:
Items
Users
QCE#
Frame Type
Port
Action
Description
Indicates the QCL user.
Indicates the index of QCE.
Indicates the type of frame to look for incomming frames. Possible frame types
Any： The QCE will match all frame type.
Ethernet：Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
LLC：Only (LLC) frames are allowed.
SNAP：Only (SNAP) frames are allowed.
IPv4：The QCE will match only IPV4 frames.
IPv6：The QCE will match only IPV6 frames.
Indicates the list of ports configured with the QCE.
Indicates the classification action taken on ingress frame if parameters configured are matched
with the frame's content. There are tree acton fields: Class,DPL and DSCP.
Class:Classified QoS class; if a frame matches the QCE it will be put in the queue.
DPL:Drop Precedence Level; if a frame matches the QCE then DP level will set to value displayed
under DPL column.
DSCP:If a frame matches the QCE then DSCP will be classified with the value Displayed under DSCP
column.
104