Danfoss District Energy - Danfoss ECL Comfort 210 Installation Manual

Installation Guide
MENU > Alarm > Temp. monitor
Lowest temp.
Circuit
1
The alarm function will not be activated if the desired flow / duct
temperature is lower than the set value.
92 DEN-SMT/DK
ECL Comfort 210 / 310, application A237 / A337
11150
Setting range Factory setting
10 ... 50 °C 30 °C
If the cause of the alarm disappears, the alarm indication and output
also disappear.
VI.LG.R1.02

Danfoss District Energy