Common Controller Settings; Introduction To 'Common Controller Settings - Danfoss ECL Comfort 210 Installation Manual

Installation Guide

7.0 Common controller settings

7.1 Introduction to 'Common controller settings'

Some general settings which apply to the entire controller are
located in a specific part of the controller.
To enter 'Common controller settings':
Action: Purpose:
Choose 'MENU' in any circuit
Confirm
Choose the circuit selector at the top
right corner in the display
Confirm
Choose 'Common controller settings'
Confirm
Danfoss District Energy
ECL Comfort 210 / 310, application A237 / A337
Examples:
VI.LG.R1.02
Circuit selector
DEN-SMT/DK 105