Configuring Danfoss Link; Tm Cc - Danfoss living connect Installation And User Manual

3. Installation - step by step
3.3 Configuring Danfoss Link
For practical reasons, it is recommended that the
Danfoss Link
pack. This makes the device mobile, and it can then
easily be positioned at a distance of up to 1.5 m from
each radiator thermostat that is to be added to the
system.
Remove the front cover from the Danfoss Link
by carefully levering it off, starting with the bottom
corners. Press and hold down the setup button using
a ballpoint pen for approximately three seconds to
start the installation menu (the start-up phase may
take several minutes).
For Help, press ? in the lower right corner.
For installation without a battery pack, please see
www.danfoss.com/living.
Danfoss Heating Solutions
CC is connected to a 014G0262 battery
TM
CC
TM
UK
DE
DK
NL
CC
TM
7