System - Danfoss ECL Comfort 210 Installation Manual

Installation Guide

7.8 System

7.8.1 ECL version
In 'ECL version' you will always be able to find an overview of the
data related to your electronic controller.
Please have this information available if you need to contact your
Danfoss sales organization concerning the controller.
Information about your ECL Application Key can be found in 'Key
functions' and ' Key overview' .
Code no.:
Hardware:
Software:
Serial no.:
Production week:
7.8.2 Display
Backlight (display brightness)
Circuit
Adjust the brightness of the display.
0:
Weak backlight.
10: Strong backlight.
Contrast (display contrast)
Circuit
Adjust the contrast of the display.
0: Low contrast.
10:
High contrast.
7.8.3 Communication
Modbus addr.
Circuit
Set the Modbus address if the controller is part of a Modbus network.
1 ... 247: Assign the Modbus address within the stated setting
range.
Danfoss District Energy
ECL Comfort 210 / 310, application A237 / A337
The Danfoss sales and order no.
for the controller
Hardware version of the
controller
Software version of the
controller
Unique number for the
individual controller
Week no. and year (WW.YYYY)
60058
Setting range Factory setting
0 ... 10
60059
Factory setting
Setting range
0 ... 10
38
Setting range Factory setting
1 ... 247
Example, ECL version
5
3
1
VI.LG.R1.02 DEN-SMT/DK 113