Danfoss ECL Comfort 210 Installation Manual page 43

Installation Guide
Application Key: Situation 1
The controller is new from the factory, the ECL Application Key
is not inserted.
An animation for the ECL Application Key insertion is displayed.
Insert the Application Key .
Application Key name and Version is indicated (example: A266
Ver. 1.03).
If the ECL Application Key is not suitable for the controller, a "cross"
is displayed over the ECL Application Key-symbol.
Action: Purpose:
Select language
Confirm
Select application
Confirm with 'Yes'
Set 'Time & Date'
Turn and push the dial to select and
change 'Hours', 'Minutes', 'Date',
'Month' and 'Year'.
Choose ''Next'
Confirm with 'Yes'
Go to 'Aut. daylight'
Choose whether 'Aut. daylight´ *
should be active or not
* 'Aut. daylight' is the automatic changeover between summer
and winter time.
Depending on the contents of the ECL Application Key, procedure
A or B is taking place:
A
The ECL Application key contains factory settings:
The controller reads / transfers data from the ECL Application Key
to ECL controller.
The application is installed, and the controller resets and starts up.
B
The ECL Application key contains changed system settings:
Push the dial repeatedly.
'NO': Only factory settings from the ECL Application Key will
be copied to the controller.
'YES*:
Special system settings (differing from the factory
settings) will be copied to the controller.
If the key contains user settings:
Push the dial repeatedly.
'NO: Only factory settings from the ECL Application Key will
be copied to the controller.
'YES*:
Special user settings (differing from the factory settings)
will be copied to the controller.
* If 'YES' cannot be chosen, the ECL Application Key does not
contain any special settings.
Choose 'Start copying' and confirm with 'Yes'.
Danfoss District Energy
ECL Comfort 210 / 310, application A237 / A337
Examples:
YES or NO
VI.LG.R1.02 DEN-SMT/DK 43