Danfoss ECL Comfort 210 Installation Manual page 75

Installation Guide
MENU > Settings > Flow / power limit
Low limit Y1 (flow / power limitation, low limit, Y-axis)
Circuit
1
Set the flow / power limitation referring to the outdoor temperature set in
'High T out X1'.
The corresponding X coordinate is set in 'High T out X1'.
MENU > Settings > Flow / power limit
Low T out X2 (flow / power limitation, low limit, X-axis)
Circuit
1
Set the outdoor temperature value for the high flow / power limitation.
The corresponding Y coordinate is set in 'High limit Y2'.
MENU > Settings > Flow / power limit
High limit Y2 (flow / power limitation, high limit, Y-axis)
Circuit
1
Set the flow / power limitation referring to the outdoor temperature set
in 'Low T out X2'.
The corresponding X coordinate is set in 'Low T out X2'.
MENU > Settings > Flow / power limit
Adapt. time (adaptation time)
Circuit
1
Controls how fast the flow / power limitation adapts to the desired
limitation.
OFF: The control function is not influenced by the 'Adapt.
time' .
1:
The desired temperature is adapted quickly.
50:
The desired temperature is adapted slowly.
MENU > Settings > Flow / power limit
Filter constant
Circuit
1
The actual filter dampens the flow / power input data by the set factor.
1:
Minor dampening (low filter constant)
50:
Major dampening (high filter constant)
Danfoss District Energy
ECL Comfort 210 / 310, application A237 / A337
11117
Setting range Factory setting
0.0 ... 999.9 l/h 999.9 l/h
11118
Setting range Factory setting
-60 ... 20 °C -15 °C
11116
Setting range Factory setting
0.0 ... 999.9 l/h 999.9 l/h
11112
Factory setting
Setting range
OFF / 1 ... 50 s OFF
11113
Setting range Factory setting
1 ... 50
The limitation function can overrule the set 'Temp. min' of the desired
flow temperature.
If the 'Adapt. time' is too low, there is a risk of unstable control.
10
VI.LG.R1.02 DEN-SMT/DK 75