Placement Of Danfoss Link™ Ft; Operation Mode; Sensor Combination - Danfoss LinkFT Installation Manual

2 Placement of Danfoss Link™ FT
Installation and placement must be according to local
building regulations.
2�1

Operation mode

Danfoss Link™ FT supports two types of operation modes.
1. Heating regulation
1. On/OFF switching
When used in heating regulation mode you have to con-
sider the following advices for controlling the heating.
When used as simple ON/OFF mode do not connect floor
sensor.
2�2

Sensor combination

When installing the Danfoss Link™ FT you need to consider
the type of heating and thus which sensors should be used.
There are three options:
4
Danfoss Link™ FT
Installation Guide