alfresco-heating.com
22. CONTROL ACCESSORIES
Two-Stage Illuminated Switch Gang Assemblies (24Vac capacity)
One or a combination of these switch gangs is required to control 2-stage heaters
NOTE: Required Switch Sequence
Illuminated switches indicate low or high stage operation at a glance
Each switch gang controls from 1 to 4 two-stage heaters in a zone
Combine switch gang assemblies/sizes to achieve optimum control
Brushed stainless steel switch plates
Standard electrical box supplied to suit each size
Factory wired
Heater & switch control wiring diagrams - Pages 34 & 35
Field supplied 120/24Vac transformer required upstream of switch gang assembly
JM-0201-TS Single Switch Gang Assembly:
JM-0203-TS Triple Switch Gang Assembly:
Remote Control Options: Single-Stage Heaters only -
Order items
separately
JP-1236-HS 4-Button Remote
Off-On-On
Control from 1 to 4 Two-Stage Heaters in one Zone
JM-0202-TS Double Switch Gang Assembly:
Control 3 to 12 Two-Stage Heaters
3 Zones with up to 4 heaters/zone
JP-1236-RK Remote Receiver Kit (field installed in heater)
Handset Transmitter
is not readily available in the market
Control 2 to 8 Two-Stage Heaters
2 Zones with up to 4 heaters/zone
JP-1236-KT Wireless Keypad
41
888-Warm-Glo
:
See details pages 23 to 28
Transmitter
(wall mounted at patio)
2100 / IO 100 Manual
IM110107
RD: SEPT 2016
R.L. 7