Table of Contents
Advertisement
alfresco-heating.com
HEATER DIMENSIONS & CONFIGURATIONS
Table 3: CAPACITIES & CONFIGURATIONS
MODEL*
2135 (-SS) / IO-135 (-SS)
2150 (-SS) / IO 150 (-SS)
2152 (-SS) / IO 152 (-SS)
Add fuel gas designation to model number: -N for natural gas; -L for
Standard model constructed of weather resistant aluminized steel with a high temperature
flat black coating. The "-SS" model is constructed with a stainless steel weather enclosure
Model 2152 / IO-152 is a two-stage heater
** Transformer Capacity: For multiple heater installation, the first heater requires 40VA and
each consecutive heater requires 20VA. The sum total will be the required Transformer capac-
ity. If total VA exceeds one transformer capacity select the next higher VA rated transformer.
Figure 3: DIMENSIONS
Side View
MOUNTING KIT OPTIONS see illustrations next page
Chain mounting bracket JP-2100-HS is supplied as an integral part of the heater.
Other optional mounting kits are available:
ITEM NO
1
2
3
WARNING: Wall Mounting Bracket JP-2100-MB, or Arm Mounting Bracket JP-2300-MK:
Ensure that anchoring to the structure is of sufficient strength, integrity and
workmanship, to adequately support the weight of the heater and any other
potential loads such as snow build up. Mount heater up to maximum 30° angle.
Voltage
Current
VAC
amps
24
40 VA**
24
40 VA**
24
40 VA**
44"
PART NUMBER
JP-2100-MB
JP-2300-MK
JP-2300-PK
Total Weight
Btu/hr input
35,000
50,000
50,000 / 36,500
DESCRIPTION
WALL MOUNTING BRACKET
ARM MOUNTING BRACKET
POST BRACKET
11
888-Warm-Glo
Length
lbs. [kg]
Inches [mm]
39 [18]
44" [ 1118]
44 [20]
44" [ 1118]
44 [20]
44" [ 1118]
End View
11"
10.5"
2100 / IO 100 Manual
IM110107
RD: SEPT 2016
R.L. 7
Advertisement
Table of Contents
