Schwank InfraSave 2100 Owner's Manual page 15

Patio heater for outdoor application and gas-fired high intensity infrared heater for commercial / industrial non-residential indoor spaces

Hide thumbs Also See for InfraSave 2100:

Table of Contents

alfresco-heating.com

Figure 8: HEATER INSTALLATION: WALL MOUNT BRACKET

NOTE: MOUNT AT MAXIMUM 30° ANGLE TO AVOID DAMAGING HEATER

1. Install the Wall Mount Bracket to the structure using field supplied hardware. Ensure

strength and integrity of mechanical fastening to structure for the weight of the heater and

any potential snow load.

2. Install the heater bracket on the heater using four nuts.

3. Install the heater bracket to the wall mount bracket, and remove the chains from the top of

the heater.

888-Warm-Glo

2100 / IO 100 Manual

IM110107

RD: SEPT 2016

R.L. 7

Table of Contents