Table of Contents
Advertisement
HEATER DIMENSIONS & CONFIGURATIONS
Table 3: CAPACITIES & CONFIGURATIONS
MODEL*
2135 / IO-135
2150 / IO 150
2152 / IO 152
Add fuel gas designation to model number: -N for natural gas; -L for
•
The enclosure cabinet of all models is constructed of marine grade stainless steel with the
•
finish appearance option of stainless steel, or high temperature flat black coating.
Models 2152 and IO-152 are two-stage heaters
•
** Transformer Capacity: For multiple heater installation, the first heater requires 40VA and
each consecutive heater requires 20VA. The sum total will be the required Transformer capac-
ity. If total VA exceeds one transformer capacity select the next higher VA rated transformer.
Figure 3: DIMENSIONS
Side View
MOUNTING KIT OPTIONS see illustrations next page
ITEM NO
1
2
3
4
CAUTION: This heater must be rigidly mounted to prevent movement from wind force.
Mounting Brackets: Ensure that anchor to the structure is of sufficient strength,
integrity and workmanship, to adequately support the weight of the heater and
any other potential loads such as snow build up, and wind force.
Mount heater up to maximum 30° angle.
Voltage
Current
VAC
amps
24
40 VA**
24
40 VA**
24
40 VA**
44"
PART NUMBER
JP-2100-CB-K
JP-2100-MB
JP-2300-MK
JP-2300-PK
Btu/hr input
35,000
50,000
50,000 / 36,500
DESCRIPTION
UNIVERSAL MOUNTING KIT
WALL MOUNTING KIT
ARM WALL MOUNTING KIT
POST MOUNTING KIT
11
Total Weight
Length
lbs. [kg]
Inches [mm]
53 [24]
57 [26]
57 [26]
End View
11
10.5"
2100 / IO-100 Manual
44"
44"
44"
IM110107
RD: AUG 2021
R.L. 11A
Advertisement
Table of Contents
