Interface; Interfacing Devices With The Balance (Rs Interface) - Sartorius M3P Installation And Operating Instructions Manual

Interface

See the "Interface Description for Sartorius Balances and
Scales" enclosed.
Interfacing Devices with the Balance
(RS Interface)
Make sure that the interface port is electrically connected to the
protective grounding conductor of the balance housing. The ca-
bling supplied as accessory components is shielded and electri-
cally connected on both ends to the cases of the connectors.
This electrical connection may result in interference caused by
cables scraping the floor or by transient currents if you have
grounded the housing or connected the protective grounding
conductor for line power. If necessary, connect an equipotential
bonding conductor to the balance.
26