Brother FAX-2840 Service Manual page 68

Error code 5A to 62
These errors do not usually occur in the normal use. The conceivable causes are noise
around the installation site, fluctuation of the power supply voltage, and failures in the
software.
---
An unidentified error occurred.
<User Check>
• Turn OFF the power switch, and turn it ON again after a while.
Step
1 Main PCB failure
Error code 63
Replace Toner
Open the Front Cover, replace Toner Cartridge.
The number of rotations of the developer roller reached the upper limit when Stop Mode is
set for the toner cartridge.
<User Check>
• Replace the toner cartridge with a new one.
• Press the [Menu] button. Next, press the [1] button and [7] button to clear the Stop
Mode*, and shift to the Continue Mode.
Step
1 Main PCB failure
CAUTION:
• When the machine is in the Stop Mode, LCD shows "REPLACE TONER" to guarantee the
print quality. On the other hand, when the Continue Mode is turned ON, the end user can
choose either to continue printing or replace the toner cartridge with a new one.
Error code 64 to 66
These errors do not usually occur in the normal use. The conceivable causes are noise
around the installation site, fluctuation of the power supply voltage, and failures in the
software.
---
An unidentified error occurred.
<User Check>
• Turn OFF the power switch, and turn it ON again after a while.
Step
1 Main PCB failure
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
2-31
Remedy
Remedy
Remedy
Confidential