High Voltage Power Supply Pcb Assy - Brother FAX-2840 Service Manual

9.30 High voltage power supply PCB ASSY

(1) Release the flat cable from the guides of the main frame R ASSY, and disconnect it from
the high voltage power supply PCB ASSY.
(2) Remove the taptite bind B M4x12 screw.
(3) Release the three hooks to remove the high voltage power supply PCB ASSY.
Front cover
sensor lever
High voltage power
supply PCB ASSY
Taptite bind B M4x12
Harness routing : Refer to
Assembling Note :
• Assemble the front cover sensor lever after assembling the high voltage power supply
PCB ASSY.
Flat cable
Guide
Flat cable
Hook
Hooks
Fig. 3-49
"10. High voltage power supply PCB
3-60
Guide
Main frame R ASSY
ASSY".
Confidential