Setting By Country (Function Code: 74) - Brother FAX-2840 Service Manual

1.3.19 Setting by country (Function code: 74)

<Function>
This function is used to customize the machine according to language, function settings, and
worker switch settings.
Note:
• Be sure to perform this procedure after replacing the main PCB ASSY or rewriting the
firmware.
<Operating Procedure>
(1) Press the [7] and [4] buttons in this order in the initial state of the maintenance mode.
The country code currently set is displayed on the LCD.
(2) Enter the country code you want to set. This country code is displayed on the LCD.
Note:
• The machine does not work normally when an incorrect country code is entered.
(3) Press the [Start] button. The new setting is saved and "PARAMETER INIT" is displayed
on the LCD. The machine beeps for one second and returns to the initial state of the
maintenance mode.
Memo:
• When the [Stop/Exit] button is pressed during the above procedure or when no button is
pressed for one minute, the operation is canceled, and the machine beeps for one
second and returns to the initial state of the maintenance mode. In this case, the modified
setting data is not saved.
5-29
Confidential