550 Code And Maintenance Symbol - Konica Minolta DRYPRO SIGMA Installation Manual

3. Install a new deodorant filter.
4. Close the film supply.
5. To reset the laser imager for the new filter and to clear the Maintenance symbol,
press and then release the Maintenance and Calibrate symbols at the same time.

550 Code and Maintenance Symbol

If the imager needs a preventive maintenance service call, the 550 code and Maintenance
symbol appear:
When the 550 code displays, contact a qualified service provider.
9G7564_en | 2013-04-01
Maintenance and Troubleshooting
3–3