Safety, Warnings, And Cautions - Konica Minolta DRYPRO SIGMA Installation Manual

Safety, Warnings, and Cautions

Safety, Warnings, and Cautions
Please read and understand all instructions before using this product.
DANGER
This equipment is operated with hazardous voltage which can shock, burn, or cause death.
• Remove wall plug before servicing equipment. Never pull on cord to remove from outlet.
Grasp plug and pull to disconnect. Do not attempt to service or repair the laser imager
yourself to avoid exposure to dangerous voltage, laser beam, or other danger. Always call an
authorized service provider for any service or repair.
• Do not operate equipment with a damaged power cord.
• Do not use an extension cord to power this equipment.
• Do not operate equipment with any of the safety interlocks overridden.
• Position the power cord so it will not be tripped over or pulled.
• Connect this equipment to a grounded wall outlet.
• A power cord is provided with this equipment. All countries must use an agency-approved
power cord with plug type suitable for the country of use. Contact a qualified dealer for help.
• Do not operate equipment with the covers open.
DANGER
This equipment contains moving parts that may be accessible to the user. Loose clothing, jewelry
or long hair may cause personal injury or damage to the equipment.
DANGER
This equipment is not contained in a sealed cabinet. Do not use this equipment in locations where
it can come in contact with liquids, including body fluids.
Caution
The operator must not touch or have contact simultaneously with the patient and the laser
imaging system.
Caution
Do not use a cell phone within 2.0 m (6.6 ft) of a laser imager. This proximity includes any imager
behind a wall adjacent to your location.
Caution
Do not use a microwave oven within 4.0 m (13.1 ft) of a laser imager. Electromagnetic radiation
from a microwave oven is only an issue if after the oven door is closed and latched, the seal does
not maintain an electromagnetic tight fit between the oven door and oven main housing.
Determining if the seal has an electromagnetic tight fit requires special detection equipment.
2 9G7565_en | 2015-10-16