550 Code And Maintenance Symbol - Konica Minolta DRYPRO SIGMA 2 Operation Manual

Maintenance and Troubleshooting
3. Remove the filter by lifting it up and pulling it forward.
H241_0007AC
4. Install a new filter.
5. Re-install the filter cover.
6. To reset the imager for the new filter and to clear the Maintenance symbol, press and
then release the illuminated Maintenance and Calibrate symbols at the same time.

550 Code and Maintenance Symbol

If the imager needs a preventive maintenance service call, the 550 code and Maintenance
symbol appear:
When the 550 code displays, contact a qualified service provider.
AD3435_en | 2017-11-17
3–5