Printer - Konica Minolta DRYPRO SIGMA Installation Manual

Printer

Printer Status Display Screen
Cover is open Code: 701
Power symbol is
yellow
Failed Power symbol is
yellow
Cartridge closure Power symbol is
is requested green and/or flash-
ing
Pause symbol is on
Offline Power symbol is
yellow
Printing Power symbol is
green and flashing
Ready Power symbol is
green
Film count displays
Self-test Power symbol is
yellow and flash-
ing
Code and film
count are replaced
by dashes
Service Mode Status code: 700
Power symbol is
yellow
Warming Power symbol is
yellow and flash-
ing
Number of min-
utes count down
until ready
9G7564_en | 2013-04-01
Web Portal DICOM Status
20701: WARNING /
Cover COVER OPEN
Open
Failed See Condition
Code
Not Ready Not Applicable
20704: WARNING /
Printing PRINTER
Disabled OFFLINE
Printing NORMAL
Ready NORMAL
Self-test WARNING /
PRINTER INIT
20700: WARNING /
Service PRINTER
Mode OFFLINE
Warm- WARNING /
ing=xx PROC INIT
Maintenance and Troubleshooting
Description
The top cover is open or one
of the side panels may be off.
The laser imager is not ready
to print.
An error has occurred that pre-
vents printing.
The laser imager completes
any prints in progress before
closing the cartridge cover.
The laser imager has been dis-
abled and does not have a
network connection.
The laser imager is currently
printing films.
The laser imager is online and
the processor has reached
operating temperature.
This occurs when power is first
applied to the laser imager.
The service switch is enabled.
The laser imager is not ready
to print.
The processor is warming up
and will not be ready to print
for xx minutes.
3–7