Error Indicators On The Display Screen - Konica Minolta DRYPRO SIGMA Installation Manual

Maintenance and Troubleshooting

Error Indicators on the Display Screen

The imager can detect errors and other conditions that require a response. Some errors
or abnormal conditions are reported on the display screen in the form of condition codes
and symbols.
Note
These errors are also reported at the Web Portal.
Calibration Error
When the calibration has failed, the display screen shows a 624, 631, or 632 error and the
Calibrate symbol is yellow:
The most common cause is a film-related problem. Depending on the cause, you may be
able to keep printing, but the imager may not be optimally calibrated.
Required Restart
When the red Restart symbol appears, you must restart before the laser imager can
continue to print.
Use the power switch on the back of the imager to power the imager off and then back
on. If the error does not clear, contact a qualified service provider.
Film Jams
When the red Film Jam symbol appears, you must clear the jam before the laser imager
can continue to print.
Related topics
Film Jam Indication and Areas
3–4 9G7564_en | 2013-04-01