Panasonic PN28080K-ID Operation Manual page 35

IP Setup Displays the access settings for the IP address configuration software, bundled
with the Panasonic network cameras. "Enable" is the factory default setting.*
For instructions, refer to Appendix.B.
Enable
Disable
LED Base Mode Displays the current LED base mode.
"Status Mode" is the factory default setting.
Status
Mode
Eco Mode
SSH Server Displays the SSH access settings. "Disable" is the factory default setting.
Enable
Disable
Login Method Displays how to check the username and password for login.
1/2 The factory default setting is "Local" for 1 and "None" for 2.
Local
RADIUS
None
SSH Server key Displays the SSH server key status.
Click the "Generate" button, and an SSH server key will be generated.
key exists
key does
Access is enabled.
Access is disabled.
Operating in the Status mode.
Operating in the ECO mode.
Access is enabled.
Access is disabled.
Login with the username and password set for this switch.
Login with authentication from the RADIUS server.
"Login Method 2" is not used.
The server key exists.
The server key does not exist.
35