3.2.4.
Traffic Class Config
Select "Advanced Config" and "QoS Config" and then "Traffic Class Config" to open
the screen shown in Figure 3-28. On this screen, you can configure the QoS and
Traffic Class settings.
Screen Description
QoS
Priority
Traffic Class
Figure 3-28 QoS Config
Displays the setting of the QoS function using IEEE802.1p.
"Disable" is the factory default setting.
Enable
QoS is enabled.
Disable
QoS is disabled.
Displays the priority value in the VLAN tag.
Displays the priority with which a frame is transferred.
51