Panasonic PN28080K-ID Operation Manual page 29

Screen Description
Target Port Select-
ing
Port Number
Trunk
Type
Port Status
Link Status
Duplex Mode
Flow Control
Auto-MDI
Select multiple target ports for configuring settings at a time.
Click the "Select All" button, and all ports will be selected.
Click the "Reset" button, and all ports will be deselected.
Click the "Set selected port (s) " button after selecting and changing the items
for configuring settings at a time, and the same settings will apply to the
selected ports.
Displays the port number.
Displays the group number for a trunked port.
Displays the port type.
1000T
1000X
Displays the current port status. For all ports, "Enable" is the factory default set-
ting.
Enable
Disable
Displays the current link status.
Up
Down
Displays the communication speed and full-duplex/half-duplex settings.
For all ports, "Auto" is the factory default setting.
Auto
100M/Full
100M/Half
10M/Full
10M/Half
Displays the flow control settings.
For all ports, "Disable" is the factory default setting.
Enable
Disable
Displays the Auto MDI/MDI-X function settings. The factory default setting is
"Disable" for a downlink port and "Enable" for an uplink twisted pair port.
Enable
Disable
The port type is 1000BASE-T.
The port type is SFP port.
The port is available.
The port is not available.
A link has been established successfully.
A link has not been established.
Auto negotiation mode
100 Mbps full-duplex
100 Mbps half-duplex
10 Mbps full-duplex
10 Mbps half-duplex
The flow control is enabled.
The flow control is disabled.
The Auto-MDI/MDI-X function is enabled.
The Auto-MDI/MDI-X function is disabled.
29