Configuring The Access Point To Provide Dhcp Service; Setting Up The Dhcp Server - Cisco 1941W Configuration Manual

Configuring the Access Point to Provide DHCP Service

!
tacacs-server host 192.168.133.231 key 7 105E080A16001D1908
tacacs-server directed-request
radius-server attribute 32 include-in-access-req format %h
radius-server host 192.168.134.229 auth-port 1645 acct-port 1646 key 7 111918160405041E00
radius-server vsa send accounting
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
transport preferred all
transport output all
line vty 0 4
transport preferred all
transport input all
transport output all
line vty 5 15
transport preferred all
transport input all
transport output all
!
end
Configuring the Access Point to Provide DHCP Service
The following sections describe how to configure the wireless device to act as a DHCP server:
•
•

Setting up the DHCP Server

By default, access points are configured to receive IP settings from a DHCP server on your network. You
can also configure an access point to act as a DHCP server to assign IP settings to devices on both wired
and wireless LANs.
Note When you configure the access point as a DHCP server, it assigns IP addresses to devices on its subnet.
The devices communicate with other devices on the subnet but not beyond it. If data needs to be passed
beyond the subnet, you must assign a default router. The IP address of the default router should be on
the same subnet as the access point configured as the DHCP server.
For detailed information on DHCP-related commands and options, see the DHCP part in
Addressing Services Configuration Guide, Release
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/
iad_dhcp_rdmp_ps6350_TSD_Products_Configuration_Guide_Chapter.html
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
332
Setting up the DHCP Server, page 332
Monitoring and Maintaining the DHCP Server Access Point, page 334
Chapter Administering the Wireless Device
12.4. Click this URL to browse to the DHCP part:
Cisco IOS IP