Cisco 1941W Configuration Manual page 320

Controlling Access Point Access with TACACS+
7.
8.
DETAILED STEPS
Command
Step 1 configure terminal
Step 2 aaa new-model
Step 3 aaa authentication login {default |
list-name} method1 [method2...]
Step 4
line [console | tty | vty] line-number
[ending-line-number]
Step 5
login authentication {default |
list-name}
Step 6
end
Step 7
show running-config
Step 8 copy running-config startup-config
To disable AAA, use the no aaa new-model command in global configuration mode. To disable AAA
authentication, use the no aaa authentication login {default | list-name} method1 [method2...]
command in global configuration mode. To either disable TACACS+ authentication for logins or to
return to the default value, use the no login authentication {default | list-name} command in line
configuration mode.
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
312
show running-config
copy running-config startup-config
Purpose
Enters global configuration mode.
Enables AAA.
Creates a login authentication method list.
Select one of these methods:
Enters line configuration mode, and configure the lines to which you want
to apply the authentication list.
Applies the authentication list to a line or set of lines.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
• To create a default list that is used when a named list is not specified
in the login authentication command, use the default keyword
followed by the methods that are to be used in default situations. The
default method list is automatically applied to all interfaces.
For list-name, specify a character string to name the list you are
•
creating.
For method1..., specify the actual method the authentication
•
algorithm tries. The additional methods of authentication are used
only if the previous method returns an error, not if it fails.
• local—Use the local username database for authentication. You must
enter username information into the database. Use the username
password command in global configuration mode.
tacacs+—Use TACACS+ authentication. You must configure the
•
TACACS+ server before you can use this authentication method.
• If you specify default, use the default list created with the aaa
authentication login command.
• For list-name, specify the list created with the aaa authentication
login command.
Chapter Administering the Wireless Device