Configuring The Enhanced Charging Service; Creating The Enhanced Charging Service - Cisco ASR 5000 Series Administration Manual

▀ Configuring the Enhanced Charging Service

Configuring the Enhanced Charging Service
A charging service has analyzers that define which packets to examine and ruledefs (ruledefs) that define what packet
contents to take action on and what action to take when the ruledef is matched. Charging services are configured at the
global configuration level and are available to perform packet inspection on sessions in all contexts.
To configure the Enhanced Charging Service:
Step 1 Create the ECS service as described in the
Step 2
Configure a ruledef as described in the
Step 3 Create a charging action as described in the
Step 4 Define a rulebase as described in the
Step 5 Optional. Define a rulebase list in the ACS configuration mode and configure the rulebase list in an APN, as described
in the Configuring Rulebase Lists
Step 6
Set EDR formats as described in the
Step 7
Set UDR formats as described in the
Step 8
Enable charging record retrieval as described in the
Step 9
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
save configuration
System Administration Guide and the Command Line Interface Reference.
Important:
the extent that the most common or likely commands and/or keyword options are presented. In many cases,
other optional commands and/or keyword options are available. Refer to the Command Line Interface
Reference for complete information regarding all commands.

Creating the Enhanced Charging Service

To create an Enhanced Charging Service, use the following configuration:
configure
active-charging service <ecs_service_name>
end
Notes:
 In this release, only one ECS service can be created in a system.
▄ Cisco ASR 5x00 Enhanced Charging Services Administration Guide
86
Creating the Enhanced Charging Service
Configuring Rule Definitions
Configuring Charging Actions
Configuring Rulebase
section.
Setting EDR Formats
Setting UDR Formats
Enabling Charging Record Retrieval
. For additional information on how to verify and save configuration files, refer to the
Commands used in the configuration examples in this section provide base functionality to
section.
section.
section.
section.
section.
section.
Enhanced Charging Service Configuration
section.