Cisco 1941W Configuration Manual page 199

Chapter Configuring Next-Generation High-Density PVDM3 Modules
7.
8.
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
controller e1 slot/port
Example:
Router(config)# controller e1 0/0/0
Step 4 shutdown
Example:
Router(config-controller)# shutdown
Step 5 exit
Example:
Router(config-controller)# exit
Step 6 voice-port slot number/port
Example:
Router(config)# voice-port 0/0/0:1
Step 7
shutdown
Example:
Router(config-voiceport)# shutdown
Step 8 exit
Example:
Router(config-voiceport)# exit
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
shutdown
exit
Information About Configuring the PVDM3 Module on Cisco Voice Gateway Routers
Purpose
Enable privileged EXEC mode
Enter your password if prompted.
•
Enter global configuration mode.
Enter config-controller mode.
Administratively shuts down the controller port.
Exit config-controller mode.
Enter config-voiceport mode.
Administratively shuts down the voice port.
Exit config-voiceport mode.
Use the exit command till you are in privileged
EXEC mode.
191