Cisco 2900 Series Integrated Services Routers Product Overview Cisco 2900 Series builds on the best-in-class offering of the existing Cisco 2800 Series Integrated Services Routers by offering four platforms (Figure 1): the Cisco 2901, 2911, 2921, and 2951 Integrated Services Routers.
Architectural Features and Benefits Architectural Feature Benefits ● The Cisco 2900 Series ISRs are highly modular platforms with several types of module slots to add Modular Platform connectivity and services for varied branch-office network requirements. ● The ISRs offer an industry-leading breadth of LAN and WAN connectivity options through modules to accommodate field upgrades for future technologies without requiring a platform replacement.
A complete list of supported modules, including a list of supported SFPs for the Cisco 2900 Series, is available at: http://www.cisco.com/go/2900.
● The ISM replaces the AIM slot; existing AIM modules are not supported in the ISM slot. ● Power to ISM slots can be managed by extensions similar to the Cisco EnergyWise framework, so your organization can reduce energy consumption in your network infrastructure. Full EnergyWise support will be available in future software releases.
The Cisco 2900 Series enables a full range of existing and emerging video services, with scaling improvements to ® support Cisco TelePresence conferencing, security, and session control.
Cisco 2900 Series Integrated Services Routers facilitate secure business transactions and collaboration. The Cisco IOS Software Security technology package for the Cisco 2900 Series offers a wide array of common security features such as advanced application inspection and control, threat protection, and encryption architectures for enabling more scalable and manageable VPN networks.
EtherSwitch Service Modules, which greatly expand router capabilities by integrating industry-leading Layer 2 or Layer 3 switching with feature sets identical to those found in the Cisco Catalyst 2960 and Catalyst 3650-E Series Switches performing local line-rate switching and routing.
PfR intelligently control the traffic to maximize the quality of the user experience and employee productivity. The user experience can be further enhanced through the addition of a Cisco WAAS Network Module which can be used to securely provide more advanced WAN optimization techniques such as TCP optimization, caching, compression, and application acceleration.
Manager (EEM), and NetFlow which allow you to know the status of your network at all times. These features, along with Simple Network Management Protocol (SNMP) and syslog, enable your organization’s management applications. Refer to Tables 4 and 5 below for details about network management and manageability support on Cisco 2900 Series Integrated Services Routers. Table 4.
Cisco IOS Embedded Event Manager (EEM) is a distributed and customized approach to event detection and recovery offered directly in a Cisco IOS Software device. It offers the ability to monitor events and take informational, corrective, or any desired EEM action when the monitored events occur or when a threshold is reached.
The Cisco 2900 Series offers these solutions by providing enhanced performance and increased modular density to support multiple services. The Cisco 2900 Series is designed to consolidate the functions of many separate devices into a single, compact system.
32 to 77ºF (0 to 25ºC) 32 to 104ºF (0 to 40ºC) 32 to 104ºF (0 to 40ºC) 32 to 104ºF (0 to 40ºC) Maximum Altitude © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 15...
RTTE Directive RTTE Directive Supported Modules The Cisco 2900 Series supports a wide range of modules that span industry-leading breadth of services at the branch office. For a list of modules supported on the Cisco 2900 Series, please visit: http://www.cisco.com/en/US/products/ps10537/products_relevant_interfaces_and_modules.html ©...
Product Description CISCO2901/K9 Cisco 2901 with 2 onboard GE, 4 EHWIC slots, 2 DSP slots, 1 ISM slot, 256MB CF default, 512MB DRAM default, IP Base CISCO2911/K9 Cisco 2911 with 3 onboard GE, 4 EHWIC slots, 2 DSP slots, 1 ISM slot, 256MB CF default, 512MB DRAM default, IP Base...
Printed in USA C78-553896-09 04/13 © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 15 of 15...